PART |
Description |
Maker |
RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
UPA800T |
2 low-voltage transistors which are designed
|
TY Semiconductor Co., Ltd
|
2SK2094 |
Low on-resistance Fast switching speed Low-voltage drive Easily designed drive circuits
|
TY Semiconductor Co., Ltd
|
G421SD |
The G421SD is designed for low power rectification
|
E-Tech Electronics LTD
|
REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
REC-14LH REC-16LH |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Unsealed, Designed for High Pressure Chamber of Cylinders, High Accuracy, Very Good Repeatability
|
Vishay
|
KCLAMP0502B |
Designed to replace polymer TVS Protects up to two I/O lines Low profile ( 1mm )
|
TY Semiconductor Co., Ltd
|
IHW40N60RF-15 |
Powerful monolithic body diode with low forward voltage designed for soft commutation only
|
Infineon Technologies A...
|
WM8991 |
The WM8991 is a highly integrated ultra-low power hi-fi CODEC designed for handsets rich in multimed
|
Wolfson Microelectronics Ltd.
|
J113 J111-D74Z MMBFJ111 MMBFJ113 MMBFJ112 |
This device is designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers
|
Fairchild Semiconductor
|
Q6008LTH1LED |
Q6008LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|